Sharp IQ-8900 Operation Manual Download

Page: 50 / 322

2. While holding down the

key, push the RESET

button on the back of the unit using the included touch
pen or a similar object. The following message will appear.

you

really

want

to initialize

the organizer’s

memory (this

will delete all main

data)?

3. Touch

to initialize

the

unit.

An initial display welcoming you to the unit appears.

If you want to take a tour and have a demonstration of

some of the features, touch

You can

press

to leave the demonstration at any time and

go back to the initial display.

The welcome display is shown each time the unit is
turned on unless it is set to off (see p. 53).

To skip the tour, or after finishing it, proceed to setting
the clock, below.

Setting the

In order for the

Calendar, Schedule, To Do,

and other

clock

time-based applications to be accurate, the built-in clock

must be set to the correct city, time and date.

1. Touch

on the welcome display.

Summary of Contents for IQ-8900



































































































































































































































































































































Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands

Sharp IQ-8900, Operation Manual

Search results

Summary of Contents for IQ-8900

Reviews:

Related manuals for IQ-8900

Brands by name

Popular brands