Install the Appliances
59
Continue with one of the following:
If the Management Server is to accept communication from Cards on a
TCP/IP port other than 4313, continue with "Specify the Management
Server TCP/IP Port" on page 59. If not, see the next bullet.
If you want to change the Enable mode timeout (for example, to always
require a username and password), continue with "Changing the Enable
Mode Timeout" on page 60. If not, see the next bullet.
Out-of-the-box Card configuration is complete. Continue with
"Configuring the ETM® System" on page 61.
The default TCP/IP port on which the Server accepts connections from all
Cards is 4313. If you changed the Management Server port from the default
in the
twms.properties
file, you must configure the Card with the new
port number.
To specify the Management Server port number (if different
from the default)
1.
Log in to the Card in Enable mode.
2.
At the
ETM(r/w)>
prompt, type the following command with the new
port number:
SERVER PORT <
number
>
3.
Type:
COMM RESET
Continue with one of the following:
If you want to change the Enable mode timeout (for example, to always
require a username and password), continue with "Changing the Enable
Mode Timeout" on page 60. If not, see the next bullet.
Out-of-the-box Card configuration is complete. Continue with
"Configuring the ETM® System" on page 61.
Specify the
Management
Server TCP/IP
Port
