Configuring Telco Spans
103
c.
In the
Media ports
box, type the starting port for the number of
media ports you reserved. The ending port field updates
automatically.
8.
In the
Public Interface
area:
a.
In the
IP address
fields, type the IP address and subnet mask or
prefix length for the Span's public interface (
eth1
).
b.
In the
Signaling port
box, type the signaling port for the public
interface.
c.
In the
Media ports
box, type the starting port for the number of
media ports you reserved. The ending port field updates
automatically.
9.
Click the
Routes
tab. The
Routes
tab displays the routes used by the
VoIP Span in NAT mode.
IMPORTANT
Configuring routes is an
expert function. The ETM System provides no error checking of the
information you enter, and misconfigured routes may impair call
traffic. Ensure that you obtain and use the correct information about
your VoIP System from your qualified personnel.
a.
To define a Route, click the
New
icon
.
The
Route
dialog box appears.