Install the Appliances
57
To discard displayed values and start over, type:
n
If you type
n
, the system logs you off without keeping your
settings. You can then press any key to begin the configuration
process again.
To accept the displayed values, type:
y
If you accept the values, the message
Restarting Card to effect
changes
appears while the Card restarts. The Spans restart
offline automatically, so that you can configure them with the
proper telephony settings before placing them inline. When you
complete configuration, be sure to place the Spans inline.
(
Not on 1050 AAA or 1060 CRC
) Complete this procedure if more than one
Span is to be licensed on the Card; otherwise, skip this step and continue
with the next step. Span 1 is licensed by default. To obtain the license key,
contact Customer Support at one of the following:
1-877-SLC-4HELP
or
)
You can also provide the Span license via the Performance Manager.
However, if you need to change the Span type, you should provide the Span
license now.
To license additional Spans
1.
After the Card reboots, log in again and enter Enable mode. (Type
Enable
, press ENTER, and then type the Enable password.)
2.
At the
ETM:1(r/w)>
prompt, type:
LICENSE <
key
>
where <
key>
is the Span License Key provided by SLC Customer
Support.
3.
Type:
RESTART
All Digital TDM Spans are shipped as T1 CAS. On 3200, 2100, and 1090
Appliances, you can change the Card rate (T1/E1) and the signaling type
(CAS, PRI, or SS7) using the procedure below. If you are installing
T1 CAS or VoIP Spans, skip this step.
IMPORTANT
If a new Span has already connected to the Management
Server before you change the Span type, the Server refuses connections
from the Span after the type is changed. This is because the Management
Server is authoritative on most configuration settings and it expects T1
CAS. To remedy this problem, delete the Card from the Performance
Manager tree pane. When the Span reconnects, the Management Server
accepts the updated configuration.
Licensing
Additional Spans
Changing the
Span Type
