130
Step 3: ETM® System Configuration
2.
In the
Remove this digit sequence from the start of the
extension
box, type
4
.
3.
In the
Prepend these digits to the extension
box, type
55598
.
4.
Select
Use Span's area code
, since the extensions are in the same
area code as the Span.
5.
Click
OK
. The resulting fully qualified numbers to which the Policy
Rules are compared are:
[1](210)555-9800 through [1](210)555-9899.
Continue with one of the following:
If you are configuring T1 PRI Spans that use NFAS Groups, proceed to
"Defining NFAS Groups" on page 131. If not, see the next bullet.
If SS7 Signaling will be used on this switch, see "Defining SS7
Groups" on page 134. If not, see the next bullet.
Authorize Management Server connections using the procedures in
"Configuring Management Server Settings" on page 148.
Since the Call Recorder System is separately purchased and licensed, its
configuration and use instructions are contained in a separate guide. See the
Call Recorder User Guide
for complete configuration instructions,
including defining Protected Extensions.
Protected
Extensions