Completing Card Configuration
77
9.
To authorize a specific IP address, click
New
and then click
IP
Address
. The
Remote IP Address
dialog box appears.
10.
Type the IPv4 or IPv6 address of the Card.
11.
Click
OK
.
12.
To authorize a range of IP addresses, click
New
and then click
IP
Range
. The
Remote IP Range
dialog box appears.
13.
In the
IP Address
box, type the IPv4 or IPv6 base address.
14.
If you typed an IPv6 address, click the down arrow and select
Prefix
,
and then type the prefix length.
15.
If you typed an IPv4 address, select
Mask
and type the subnet mask or
select
Prefix
and type a prefix length.
16.
Click
OK
.
17.
Repeat the above steps for all authorized Telnet clients.
18.
The settings on the
ETM Server
tab were configured during initial
Card configuration via the
Console
port. If you need to change these
settings, see "Viewing/Changing Network Information for Card/Server
Communication" in the
ETM
®
System Administration and Maintenance
Guide
.
19.
Click the
Security
tab.
See "Managing Telnet
Logins to a Card" in
the
ETM
®
System
Administration and
Maintenance Guide
and "Logging In to a
Span via Telnet" in the
ETM
®
System
Technical Reference
for more information
about logging in to a
Card or Span via
Telnet.