120
Step 3: ETM® System Configuration
2.
Under the
World INI
box, click
Modify
. The
Software Version
Selection
dialog box appears. Only
.WNP
files in the
ps\software_repository\ini
directory in the ETM Server installation
directory appear.
3.
Click the
.WNP
file that represents the World Numbering Plan for this
Appliance locale, and then click
OK
.
4.
Under the
Local INI
box, click
Modify
. The
Software Version
Selection
dialog box appears. Only
.LNP
files in the
ps\software_repository\ini
directory in the ETM Server installation
directory appear.
5.
Click the
.LNP
file that represents the Local Numbering Plan for this
Appliance locale, and then click
OK
.
6.
In the
Dial Plan Configuration
dialog box, be sure that
install
is
selected under each box, and then click
OK
.
The Dialing Plan(s) is/are downloaded to the Span(s) and used
immediately for call processing.
Continue with one of the following:
If SMDR, NFAS, SS7, AAA Services, or Call Recording are in use,
continue with ―Configuring Switches‖ on page 121. Otherwise, see the
next bullet.
Continue with "Performing Telephony Service Cutover" on page 155.
IMPORTANT
If a
Dialing Plan file is
modified on the Server,
it must be reinstalled
on the Span(s) before
the changes take
effect.
