Schaerer Coffee Art TouchIT Programming Manual Download Page 30

Page: 30 / 154

www.schaerer.com

Programming

PASCA_TOUCHIT_EN

V02 | 07.2013

Overview

Overview of the 4 main menus with menu items:
•

The "Configuration" main menu contains the parameter and user interface settings.

•

The "System Parameters" main menu contains the parameter and function settings in ac-
cordance with the machine configuration.

•

The "Infos" main menu provides information about the installed software versions and the
counters and statistics.

•

The "Accounting" main menu contains the selection of the payment systems and their set-
tings.

Touching this field opens the adjustment wheel.

►

Set the desired value by turning the wheel up or down.

►

Confirm the set value by pressing the check mark.



The set value is adopted and displayed in the field.

Enable / disable a function

Opens a selection field.

Symbol

Description

Summary of Contents for Coffee Art TouchIT



























































































































































Search results

Summary of Contents for Coffee Art TouchIT

Reviews:

Related manuals for Coffee Art TouchIT

Brands by name

Popular brands

Schaerer Coffee Art TouchIT, Programming Manual

Search results

Summary of Contents for Coffee Art TouchIT

Reviews:

Related manuals for Coffee Art TouchIT

Brands by name

Popular brands