PASCA_TOUCHIT_EN
V02 | 07.2013
55
Configuration
4) Output sequence
Selection menu for the possible dispensing
sequences for beverages with milk.
None
Milk before cof-
fee
Milk after coffee
The standard setting is
"Milk before coffee".
The setting appears for
beverages with milk.
5) Output sequence choco
Selection menu for the possible dispensing
sequences for beverages with choco.
No milk
Milk before
Milk after
The standard setting is
"Milk before".
The setting appears for
beverages with choco.
6) Product preselection
If set to "ON":
Activates the option of preprogramming a
quantity of beverages. These beverages are
dispensed consecutively.
If set to "OFF":
The operator must wait for the current pro-
duct to be fully dispensed before another
product can be selected.
On/off
The standard setting is
"ON".
In "Self" mode, switch the
parameter to "OFF".
7) Dispensing mode (beverages)
Dispensing mode for single or double:
The "Normal" selection causes a single be-
verage to be dispensed.
"Double product" activates the dispensing of
a double beverage in combination with the
[2x] field or with an active "2x Click" parame-
ter in the "General Parameters".
Normal
Double product
A beverage of your choice
is selected in the "1 Pro-
duct type" parameter.
The standard setting is
"Normal".
7) Dispensing mode (milk)
Selection options for milk:
The "Normal" selection causes a single milk
beverage to be dispensed.
Pressing "Start" causes milk to be dispensed
and "Stop" causes it to stop.
Pressing and holding causes milk to be dis-
pensed until the field is released again.
Selection together with "Double product"
causes milk to be dispensed twice.
Normal
Start/stop pro-
duct
Press/hold pro-
duct
Double product
"Milk" is selected in the "1
Product type" parameter.
The standard setting is
"Start/stop".
7) Dispensing mode (HW)
Selection options for hot water:
The "Portion control" selection causes a
single portion of hot water to be dispensed
with the defined water quantity.
Pressing "Start" causes steam to be dispen-
sed and "Stop" causes it to stop.
Pressing and holding causes steam to be
dispensed until the field is released again.
Dosed
Start/stop pro-
duct
Press/hold pro-
duct
"Hot water" is selected in
the "1 Product type" para-
meter.
The standard setting is
"Start/stop".
To set the hot water quan-
tity, see the "501 Water
volume" parameter.
7) Dispensing mode (CW)
Selection options for the cup warmer:
The "Portion control" selection causes a
single portion of steam to be dispensed with
the defined steam quantity.
Pressing "Start" causes steam to be dispen-
sed and "Stop" causes it to stop.
Pressing and holding causes steam to be
dispensed until the field is released again.
Start/stop pro-
duct
Press/hold pro-
duct
"Cup Heater" is selected in
the "1 Product type" para-
meter.
The standard setting is
"Start/stop".
To set the steam quantity,
see the "301 max. heating
time" parameter.
Parameters: Common Settings
Display text
Description
Setting range
Notes