Schaerer Coffee Art TouchIT Programming Manual Download Page 142

Page: 142 / 154

www.schaerer.com

Troubleshooting

PASCA_TOUCHIT_EN

V02 | 07.2013

142

►

Remove the flash drive.



The instruction to restart the machine is displayed.

►

Select the [Restart] (E) field.



The "Update" window opens.



The instruction to confirm the software update appears.

►

Select [YES] (F) for an update. Select [NO] to close the procedure.



The "Hex Load" window opens.



Data are loaded and listed in the window.



The data download is confirmed.

►

Select the [Exit] (G) field in the "Hex Load" window.



The "Update" window opens.

►

Select the [Schliessen/Close] field.



The current TouchIT software is loaded and the machine is ready for use.

Troubleshooting when installing the touch screen

Troubleshooting after a touch screen installation:

If the machine does not start after the software was installed, take the following steps.

Further information on storing and transferring data can be found under "Basic operation"-
"Overview of data transfer".

When the machine is restarted, it hangs up in the "Reboot coffee Machine" process (1).

Summary of Contents for Coffee Art TouchIT



























































































































































Search results

Summary of Contents for Coffee Art TouchIT

Reviews:

Related manuals for Coffee Art TouchIT

Brands by name

Popular brands

Schaerer Coffee Art TouchIT, Programming Manual

Search results

Summary of Contents for Coffee Art TouchIT

Reviews:

Related manuals for Coffee Art TouchIT

Brands by name

Popular brands