Saab 95 1967, Service Manual

Page: 558 / 610

Left rear fender
As from model 1970 the fuel filler tube opening in the
left rear fender is located lower down than in earlier
models. Only the new type of rear fender is available for
replacements. A new filler tube has therefore been pro-
duced for Saab 95 up to and incl. chassis No.95.010.115,
while for other cars up to and incl. model 1969 an adapt-
er set has been made up containing parts for the new filler
tube that are needed to be able to fit fenders of the new
type to older cars. Where replacements for the old type
of fender are needed, you should order the new fender
plus the appropriate adapter set. For Saab 95 up to and
incl. chassis No. 95.010.115 order only the new filler tube.
Installation
1. Remove the old fender. Clean the wheel housing to
prevent dirt from entering the fuel tank.
2. Remove the filler tube and connecting hose. Leave
the vent tube connecting hose in place on the vent
tube of the tank.
3. Fit a plastic plug into the small vent tube of the new
filler tube. Connect the filler hose between the fuel
tank and filler tube, using the existing hose clamps.
Fit the vent tube and connecting tube.
CONNECTING FILLER TUBE TO FUEL TANK
1. Plastic plug
2. Hose clamp
3. Vent hose
4. Connecting tube
5. Hose clamp
6. Connecting hose
7. Hose clamp
820—6 9‘“
4 Mount the fender. Spread a string of sealant betvvelen
I the filler tube flange and the fender, and tighten e
flange and holder with the four self tapping screws.
:lg‘tl'E! Use only the old type of filler cap (With venti
lation).
CONNECTING FILLER TUBE TO HEAR FENDER
1. Sealing collar
2. Fender
3. Holder
4. Philips screw
5. Plastic plug
6. Hose clamp
7. Vent hose
En‘_ IA-—