Saab 95 1967, Service Manual

Page: 389 / 610

REMOVAL, INSTALLATION
REMOVAL
If work is to be done on the transmission unit only, the
entire power unit must be lifted out. The engine is then
separated from the transmission unit.
1, Disconnect the battery earth cable from the battery.
2, Remove the hood by opening it wide and then re-
moving the locking springs for the hood hinges. Dis-
connect the hose for the windshield washer. Now
grip the hinge stay. bending it slightly inwards to re-
lease the pin on one side. An assistant will hold the
hood on the other side and help to lift it off.
REMOVAL OF
ENGINE HOOD
Remove the windshield washer container and the
washer pump.
3. Drain off the cooling water through the radiator
draining tap. To ensure that draining will be as ef-
fective as possible, bleed the system through the
bleed nipple on the heat exchanger. Save the cool-
ant.
Up to and incl. model 1968
4. Disconnect the headlight and direction indicator
cables.
5. Back off the four screws for the front panel and de-
tach the two radiator supports from the car body.
Detach the clamping straps from the radiator and
remove the hood lock and control wire.
Model 1969—1970
4- Remove the headlight decor frames. Disconnect the
headlight cables.
5- Back off the four screws for the front panel and de-
tach the two radiator supports from the car body.
Detach the clamping straps from the radiator and
remove the engine hood control wire.
As from model 1971 (with headlight washer)
es. Disconnect the
4. Remove the headlight decor fram
hoses for the headlight washers from the respective
nozzles. Disconnect the headlight cables.
5. a. Back off the four screws for the front panel and
detach the two radiator supports from the car
body. Detach the clamping straps from the ra-
diatcr and remove the control wire. .
b. Bend the upper bracket on the expanSIon tank
backwards so that the headlight washer motor
goes clear.
0. Detach the cables from the headlight washer
motor (note the connection positions of the
cables).
REMOVAL OF FASTENING SCREWS, FRONT PLATE
6. Remove the front panel, taking great care to avoid
damaging the paintwork.
REMOVAL OF
FRONT PLATE
A7n_ 1