Saab 95 1967, Service Manual

Page: 251 / 610

LIGHTING
HEADLIGHTS, UP TO AND INCL. MODEL 1953 AND
cAFIS WITH SEALED BEAM HEADLIGHTS
The headlights are recessed in the front panel. The left
and right headlight inserts are identical and can be fitted
on either side. The headlight bulbs have two filaments,
one for high beam and one for dipped beam, regulated
with a foot dipper switch. In the R.H.D. Saab 95/96, the
changingover from high beam to dipped beam is, how-
ever, made by means of the flasher switch lever. Up to and
incl. model 1968, all cars to the USA are, however, equip-
ped with foot dipper switch. For certain markets, Sealed
S 979
HEADLIGHT, ASYMMETRIC
1. Ring 6. Mounting nut
2. Insert with glass 7. Bulb
3. Adjusting ring 8. Fastening spring
9. Rubber seal
4. Adjusting screw
5. Adjusting nut
Fm 1977
Beam headlights are mounted.
As from model 1969, all cars have a
for dimming and for headlight flashing. .
A warning lamp glows red or blue when the headIIghts
are on high beam. The dipper switch is located on the
lower part of the dash panel to the left of the pedals. The
car is equipped with left dipping or right dipping asym-
metric lamps, or — for certain markets — Sealed Beam
units.
To modify the asymmetric lamps so that they produce
ordinary symmetric light, for instance when travelling by
car abroad, the asymmetric section can be masked with
untransparent tape or in some other suitable way.
handoperated device
HEADLIGHT, SEALED BEAM
1. Ring 4. Nut
5. Shell
6. Adjusting screw
2. Sealed beam insert
3. Adjusting ring
351 —1