Saab 95 1967, Service Manual

Page: 199 / 610

REAR MUFFLER
Removal
1. Jack up the R.H. side of the car. Remove the rear
wheel, and loosen the exhaust pipe clamp at the rear
muffler.
2_ Up to and incl. model 1975: Back off the two upper
nuts by means of which the muffler is suspended.
$550
REAR
MUFFLER SUSPENSION, UP TO AND INCL. MODEL
1975
As from model 1976: Unhook the rubber suspension
from the hooks.
$5311
REAR MUFFLER SUSPENSION, AS FROM MODEL 1976
3. Detach the muffler from the exhaust pipe and remove
the muffler.
Fobr 1977
Installation
1. Pass the muffler onto the exhaust pipe. Don't forget
the clamp.
2. Fit the muffler to the bracket on the wheel house
wall.
3. Tighten the clamp at the exhaust pipe connectio
the muffler.
4. Check that the exhaust system is not mounted under
tension, vibrations can in this case occur and give
noise in teh car body.
5. Start the engine and check for leaks.
6. Remount the rear wheel, and lower the car.
nto
EXHAUST PIPE
Removal
Jack up the right side of the car before starting work.
1. Take off the right rear wheel and release the clamp
joining the exhaust pipe to the rear muffler.
2. Loosen the muffler suspensions at the body.
Up to and incl. model 1975: Back off and remove the
upper nuts with which the rear muffler is supended.
As from model 1976: Unhook the rubber suspensions
from the hooks. Pull the muffler off the exhaust pipe.
3. Undo the clamp joining the exhaust pipe to the front
muffler.
4. Up to and incl. model 1975: Back off and remove the
nuts with which the exhaust pipe is secured under the
floor.
5. Pull the exhaust pipe off the front muffler.
Reassembly
Reassembly takes place in the reverse order.
Make sure that the exhaust pipe is properly fitted in the
muffler pipe connections, thus ensuring effective sealing
when the clamps are tightened and precluding tension in
the rubber cushions at the floor plate. If the exhaust pipe
is mounted under tension, vibrations may easily develop
in the body of the car.
252—3