Ryobi RSH3045U, Original Instructions Manual, Page: 7 / 244

5 English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
Dry sticks and
twigs
By inserting these at the
end of your shredding
task, this will help to
clean the moisture and
plant sap from the inside
of the product and the
cutting assembly.
■ Do not allow garden waste to accumulate
before shredding as it will begin to compost,
become too damp and clog the cutting
assembly. Dry material will help most
material to clear the ejection chute. Save
some dry sticks until last to help clean the
blade area.
■ Frequently monitor the build up/collection
of shredded material.
■ The exit of the discharge chute must be
clear at all times to prevent blockages.
■ When the collection bin is full, turn off the
product before emptying.
WARNING
Do not put your hands up inside the
shredder’s discharge chute to clear away
shredded material while the product is
turned on or connected to the mains supply.
The blades are sharp. Wear heavy-duty
gloves and exercise extreme caution when
cleaning and clearing blockages.
WARNING
When feeding long woody branches/stems
into the product be careful of whip and
vibrations as they get caught by the cutter.
The operator must wear eye protection
whenever using the product.
WARNING
The cutting device has a tendency to pull
branches/stems into the product. Do not
try to impede entry of the material being
cut once feeding has started. Always wear
gloves to prevent skin lacerations when
feeding material into the product.
NOTE: While setting up the product for use,
make sure that the product is secured so that
it does not tip over ( see steps 2 to 6 on page
197 ).
NOTE: In normal use, do not turn off the
product until all of the shredded material has
cleared the cutter assembly. If the product
is turned off too quickly, remaining pieces of
material may clog the blade assembly and
stall the motor when the product is turned
back on.
SYMBOLS ON THE PRODUCT
Read and understand
all instructions before
operating the product, follow
all warnings and safety
instructions.
Beware of thrown or
fl ying
objects. Keep all bystanders,
especially children and pets,
at least 15 m away from the
operating area
Danger - Rotating blades.
Keep hands and feet out of
openings while the product is
running.
Turn off and remove plug from
mains before maintenance or
if cord is damaged.
Wear eye and ear protection.
Do not use as a step.
Wait until all machine
components have completely
stopped before touching
them.
Wear non-slip, heavy duty
gloves.
Conforms to all regulatory
standards in the country in
the EU where the product is
purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity