Ryobi RLT1830H13, Original Instructions Manual, Page: 7 / 224

5 English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
TRANSPORTATION AND STORAGE
Ŷ
Stop the machine and allow it to cool
before storing or transporting. Do not store
or transport the machine with batteries
fitted, remove and secure separately.
Ŷ
Clean all foreign material from the product.
Store it in a cool dry and well-ventilated
place that is inaccessible to children.
Keep away from corrosive agents such as
garden chemicals and de-icing salts. Do
not store outdoors.
Ŷ
For transportation, secure the machine
against movement or falling to prevent
injury to persons or damage to the machine.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories and
attachments. Failure to do so can cause
possible injury, poor performance and may
void your warranty.
WARNING
Servicing requires extreme care and
knowledge and should be performed
RQO\ EH D TXDOL¿HG VHUYLFH WHFKQLFLDQ )RU
service we suggest you return the product
to your nearest authorized service center for
repair. When servicing, use only identical
replacement parts.
Ŷ
Ensure the battery is disconnected and
the supply cord is disconnected from the
supply before performing any maintenance,
cleaning or adjustments.
Ŷ
You may make adjustments and repairs
described here. For other repairs, contact
the authorized service agent.
Ŷ
For replacement line use only nylon
filament line of the diameter described in
the specification table of this manual
Ŷ
After extending new cutter line, always
return the product to its normal operating
position before starting.
Ŷ
After each use, clean the product with a
soft dry cloth. Any part that is damaged
should be properly repaired or replaced by
an authorized service centre.
Ŷ
Check all nuts, bolts and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition.
RESIDUAL RISKS
Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise in use and the operator
should pay special attention to avoid the
following:
Ŷ
Injury caused by vibration. Hold the tool by
designated handles and restrict working
time and exposure.
Ŷ
Exposure to noise can cause hearing injury.
Wear ear protection and limit exposure.
RISK REDUCTION
It has been reported that vibrations from hand-
held tools may contribute to a condition called
Raynaud’s Syndrome in certain individuals.
Symptoms may include tingling, numbness
DQGEODQFKLQJRIWKH¿QJHUVXVXDOO\DSSDUHQW
upon exposure to cold. Hereditary factors,
exposure to cold and dampness, diet,
smoking and work practices are all thought
to contribute to the development of the these
symptoms. There are measures that can be
taken by the operator to possibly reduce the
effects of vibration:
Ŷ
Keep your body warm in cold weather.
When operating the unit wear gloves
to keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
Ŷ
After each period of operation, exercise to
increase blood circulation.
Ŷ
Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and
see your doctor about these symptoms.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.