Ruijie RG-S2900G-E Series Configuration Manual Download Page 229

Page: 229 / 943

Configuration Guide

Voice VLAN Configuration

Private VLAN

hybrid-port interface

Yes;

Voice

VLAN

must be configured to

be Primary VLAN.

Trunk Port

Yes; Native VLAN of

the access port must

be Voice VLAN and

the access port allows

the VLAN passing.

Hybrid Port

Yes; Native VLAN of

the access port must

be Voice VLAN and

be in the list of

untagged

VLANs

whose

passing

allowed by the access

port.

Uplink interface

Caution

1) When cooperating with 802.1x and Web Authentication for

access control, Voice VLAN needs to be configured with

security channel and permits OUI address of Voice VLAN for

authentication-free VoIP communication.

2) If subscribers' IP phones send tagged voice stream and

802.1x authentication and Guest VLAN are enabled on the input

port, you need to allocate different VLAN IDs for the voice

VLAN, the default VLAN of the input port and the Guest VLAN of

802.1x in order to ensure the normal use of various functions.

3) Since Protocol VLAN takes effect only for untagged packets

from Trunk Port /Hybrid Port and only tagged voice streams are

processed on the Trunk / Hybrid Port under Voice VLAN auto

mode, do not set a VLAN as Protocol VLAN and voice VLAN

simultaneity.

4) Under auto mode, do not configure OUI address as static

one; otherwise, auto mode will be affected.

Voice VLAN safe mode

Safe mode is available for separate transmission of voice streams and data

streams. When safe mode is enabled, Voice VLAN only permits voice stream

transmission. Only the streams whose source MAC address matches the OUI

address of voice VLAN are allowed to transmit in voice VLAN, others are

Summary of Contents for RG-S2900G-E Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands

Ruijie RG-S2900G-E Series, Configuration Manual

Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands