Ruijie RG-S2900G-E Series, Configuration Manual

Page: 129 / 943

Configuration Guide Threshold Configuration
Viewing the Configuration
The following commands are used to view the threshold values of different categories:
Command Purpose
show threshold cpu Show the CPU utilization threshold.
show threshold memory
Show the memory utilization threshold.
show threshold temperature Show the temperature utilization threshold.
Typical Example of Threshold Configuration
Network Requirement
N/A
Network Topology
N/A
Configuration Steps
Use the following commands to set the warning and critical threshold of the CPU utilization and
temperature to 80 and 90, 50 and 80 respectively:
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config) # threshold set cpu member 1 80 90
Ruijie(config)#threshold set temperature member 1 60 80
Configuration Verification
Use the show threshold command to view the threshold of each category:
Ruijie # show threshold cpu
Device Warning Critical
Member 1: 80 90
Ruijie # show threshold memory
Device Warning Critical
Member 1: 90 100
Ruijie # show threshold temperature
Device Warning Critical
Member 1: 60 80
The information above tells that the CPU utilization and temperature threshold have been set as the
specified values, while the memory utilization threshold is still the default value.