Ruijie RG-S2900G-E Series, Configuration Manual

Page: 602 / 943

Configuration Guide SSH Terminal Service Configuration
Command Description
configure terminal Enter the global configuration mode
no enable service ssh-server Delete the key to disable SSH Server.
Configuring the Supported SSH Server Version
By default, the SSHv1 and SSHv2 are compatible. Run the following commands
to configure the SSH version.
Command Description
configure terminal Enter the configuration mode
ip ssh version {1|2} Configure the supported SSH version.
no ip ssh version Restore the SSH default version.
Configuring SSH User Authentication Timeout
By default, the user authentication timeout period of the SSH SERVER is 120
seconds. Run the following commands to configure the SSH user authentication
timeout period.
Command Description
configure terminal Enter the configuration mode
ip ssh time-out time Configure the SSH timeout period (1-120sec)
no ip ssh time-out
Restore the SSH default user authentication timeout
period 120 seconds.
Configuring SSH Re-authentication Times
This command is used to set the authentication attempts for SSH user
requesting connections to prevent illegal actions such as malicious guesswork.
The authentication attempts are 3 for the SSH Server by default. In other words,
it allows the user to enter the username and password for three times to attempt
the authentication. Run the following commands to configure the SSH
re-authentication times:
Command Description
configure terminal Enter the configuration mode
ip ssh authentication-retries retry times
Configure SSH re-authentication times (range 0-5)
no ip ssh authentication-retries Restore the default SSH re-authentication times as 3.