Ruijie RG-S2900G-E Series Configuration Manual Download Page 265

Page: 265 / 943

Configuration Guide MSTP Configuration

Configuring the Spanning Tree Mode

According to the 802.1-related protocols, it is not necessary for administrators

to set much for three versions of the spanning tree protocols such as the STP,

RSTP and MSTP. These versions are compatible with one another naturally.

However, given that some manufacturers will not develop the spanning tree

protocol by standards, it may cause some compatibility problem. Hence, we

provide a command to facilitate administrators to switch to the lower version of

the spanning tree protocol for compatibility when they detect that this device is

not compatible with that of other manufacturers.

Note: When you switch to the RSTP or STP version from the MSTP version, all

information about MSTP Region will be cleared.

The default mode of the device is MSTP.

To enable the spanning tree protocol, execute the following command in the

privileged mode:

Command

Function

Ruijie#

configure terminal

Enter the global configuration mode.

Ruijie(config)#

spanning-tree

mode mstp

rstp

stp

Switch the spanning tree version.

Ruijie(config)#

end

Return to the privileged EXEC mode.

Ruijie#

show spanning-tree

Verify the configuration.

Ruijie#

copy running-config

startup-config

Save the configuration.

To restore the spanning tree mode to the default value, use the

spanning-tree mode

command in the global configuration mode.

Configuring Switch Priority

Switch priority allows you to select the root and draw the topology of a network.

It is recommended that administrators set the core device with higher priority (or

smaller value) to facilitate the stablization of the whole network. You can assign

different switch priorities for various instances so that various instances can run

separate spanning tree protocol.Only the priority of CIST (Instance 0) is related

to the devices between different regions.

As mentioned in Bridge ID, there are 16 values for the priority, and all of them

are multiples of 4096, which are 0, 4096, 8192, 12288, 16384, 20480, 24576,

28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, and 61440. The

default value is 32768.

Summary of Contents for RG-S2900G-E Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands

Ruijie RG-S2900G-E Series, Configuration Manual

Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands