Ruijie RG-S2900G-E Series Configuration Manual Download Page 541

Page: 541 / 943

Configuration Guide

802.1x Configuration

The following example shows how to configure Inaccessible Authentication Bypass:

Ruijie#

configure terminal

Ruijie(config)#

interface

fa 0/1

Ruijie(config-if)#

dot1x port-control auto

Ruijie(config-if)#

dot1x critical

Ruijie(config-if)#

dot1x critical vlan

100

If there are already certain authenticated users on the port before all RADIUS servers fail, new users are

authorized to access the network after servers have failed and if no inaccessible VLAN is configured on the port. If

IAB authentication with inaccessible VLAN has been configured on the server, new users won't be authorized to

access network in order to guarantee that the authenticated users have the priority to use network.

If there are already normally authenticated users on the port before all servers have failed, the port will

remain the original state and won't jump to the inaccessible VLAN if the servers are failed during user's

re-authentication.

After all users under the port are disconnected, the port will automatically exit from the inaccessible VLAN.

If the inaccessible VLAN configured doesn't exist, the inaccessible VLAN will be created automatically when

entered by the port and be removed automatically when exited by the port.

The inaccessible VLAN doesn't support private VLAN, remote VLAN and super VLAN (including SUB

VLAN).

Configuring IAB Authentication with Recovery action

RADIUS server is failed, some users won't be able to pass the authentication, and the switch will authorize the users to

access network. When RADIUS server is recovered, this feature will allow IAB users under the port to reinitialize

authentication to verify user's identity.

Execute the following steps to configure IAB authentication with recovery action:

Command

Function

Ruijie#

configure terminal

Enter global configuration mode.

Ruijie(config)#

interface

interface-id

Enter interface configuration mode.

Ruijie(config-if)#

dot1x

critical

recovery

action

reinitialize

Allow IAB users under the port to reinitialize

authentication when the server has recovered.

Ruijie(config-if)#

end

Return to privilege EXEC mode.

Ruijie#

show running-config

Display all configurations.

Summary of Contents for RG-S2900G-E Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands

Ruijie RG-S2900G-E Series, Configuration Manual

Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands