Ruijie RG-S2900G-E Series Configuration Manual Download Page 28

Page: 28 / 943

Configuration Guide

Basic Switch Management Configuration

Configuring a System Name

Our products provide the following commands to configure a system name in

the global configuration mode:

Command

Function

Ruijie(Config)#

hostname

name

Configure a system name with printable

characters less than 255 bytes.

To restore the name to the default value, use the

no hostname

command in the

global configuration mode. The following example changes the equipment

name to RGOS:

Ruijie#

configure terminal

//Enter the global configuration mode.

Ruijie(config)#

hostname RGOS

//Set the equipment name to RGOS

RGOS(config)#

//The name has been modified

successfully.

Configuring a Command Prompt

System name will be the default prompt if you have not configured command

prompt. (if the system name exceeds 32 characters, intercept the first 32

characters) The prompt varies with the system name.You can use the

prompt

command to configure the command prompt in the global configuration mode,

and the command prompt is only valid in the EXEC mode.

Command

Function

Ruijie#

prompt

string

Set the command prompt with printable

characters. If the name exceeds 32

characters, intercept the first 32 characters.

To restore the prompt to the default value, use the

no prompt

command in the

global configuration mode.

Banner Configuration

Overview

When the user logs in the switch, you may need to tell the user some useful

information by configuring a banner. There are two kinds of banners:

message-of-the-day (MOTD) and login banner. The MOTD is specific for all

users who connect with switches. And when users log in the switch, the

notification message will appear on the terminal. MOTD allows you send some

urgent messages (for example, the system is to be shut down) to network users.

The login banner also appears on all connected terminals. It provides some

common login messages. By default, the MOTD and login banner are not

configured.

Summary of Contents for RG-S2900G-E Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands

Ruijie RG-S2900G-E Series, Configuration Manual

Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands