Ruijie RG-S2900G-E Series, Configuration Manual

Page: 523 / 943

Configuration Guide 802.1x Configuration
Figure 0-3
Figure 0-4
For the maximum data rate, you need to fill in the following values:
The unit of the maximum data rate is kbps.
For users with the maximum data rate of 10M, you need to fill in the following values:
Figure 0-5
For the customized header, follow those provided above. The maximum data rate is 10M, that is, 10000kbsp, and makes
0x00002710 in the Hex system. You only need to fill in the corresponding field.
This function calls for no settings on the device end, and works as long as the device end supports authorization.
Configuring the Authentication Mode
In the standard, the 802.1x implements authentication through the EAP-MD5. The 802.1X designed by Ruijie can perform
authentication through both the EAP-MD5 (default) mode and the CHAP and PAP mode. The advantage of the CHAP is
that it reduces the communication between the switch and the RADIUS SERVER, thus alleviating the pressure on the
RADIUS SERVER. Same as the CHAP mode, the communication between the PAP and RADIUS SERVER occurs only
once. Although the PAP mode is not recommended for its poor security, it can meet the special needs of the user in some