Ruijie RG-S2900G-E Series Configuration Manual Download Page 374

Page: 374 / 943

Configuration Guide

DHCPv6 Configuration

DHCPv6 Configuration

DHCPv6 Overview

Along with the development of IPv6 network, IPv6-based network is being applied more and

more widely. As the framework proposed at the beginning of IPv6 design, the automatic

configuration of network nodes has become a key feature of IPv6 network. In the new network

framework, the concepts of stateless configuration and stateful configuration were brought

forward. Through stateless auto-configuration, the new nodes in the network can complete all

configurations via Route Advertisement; while in stateful auto-configuration, the network nodes

need interact with relevant configuration server in the network in order to complete the

configuration of network address and other parameters. As the only stateful configuration model

developed at the present time, DHCPv6 is fully described in RFC3315.

Comparatively complete description on the application model of DHCPv6 has been given in

RFC3315 (Dynamic Host Configuration Protocol for IPv6). Similar to the framework of

sDHCPv4, the application model of DHCPv6 is composed of the DHCP server, DHCP clients

and DHCP relay. The configuration parameters can be obtained through the interaction

between DHCP clients and DHCP server, while the DHCP relay can link the DHCP clients with

the DHCP server outside the local link. The message interaction and parameter maintenance

basically follow the practices of DHCPv4, but DHCPv6 do give proper consideration to the

message structure and process according to the new network.

In IPv6 network, the auto-configuration of network nodes can be divided into:

Stateless auto-configuration: Network nodes will acquire configuration parameters from route

advertisement.

Stateful auto-configuration: Network nodes will acquire configuration parameters from the

DHCPv6 server.

Fig 1 DHCPv6 stateful auto-configuration

As shown in the above figure, the new network node (host or interface) will send a multicast

message (Solicit) to all the DHCPv6 servers and DHCPv6 relays in the local link (address:

FF02::1:2; port: 547), and the DHCPv6 servers will send the unicast Advertise reply message

after receiving such message. After selecting the DHCP server, the DHCP clients will send the

Summary of Contents for RG-S2900G-E Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands

Ruijie RG-S2900G-E Series, Configuration Manual

Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands