Ruijie RG-S2900G-E Series Configuration Manual Download Page 365

Page: 365 / 943

Configuration Guide

DHCP Relay Configuration

a DHCP server has been selected when the DHCP client sends the DHCP

request message. Here, the DHCP request message includes the optional

server-id. In some particular application circumstances, we need to enable this

option for relay in order to reduce loads on the network server. In this way, the

DHCP request message is only sent to the specified DHCP server, instead of to

every configured DHCP server. This is the DHCP check server-id function.

Configuring DHCP

Configuring the DHCP Relay Agent

To configure the DHCP relay agent, execute the following commands in the

global configurtion mode:

Command

Function

Ruijie (config)#

service dhcp

Enable the DHCP agent.

Ruijie(config)#

no service dhcp

Disable the DHCP agent.

Configuring the IP Address of the DHCP Server

After you have configured the IP address of the DHCP Server, the DHCP

request message received by the device will be forwarded to it. At the same

time, the DHCP response message received from the DHCP server will also be

forwarded to the DHCP Client.

The IP address of the DHCP server can either be configured globally or on the

layer 3 interface. Up to 20 IP addresses can be configured for the DHCP server

in every mode. When the DHCP request message is received from an interface,

the DHCP server of the interface is first used. If no DHCP server is configured

on the interface, the DHCP server globally configured will be used.

The DHCP supports vrf-based relay function by adding the vtf parameter to the

IP address of the DHCP server.

To configure the IP address of the DHCP server, exeute the following

commands in the global configuration mode:

Command

Function

Ruijie(config)#

IP helper-address

[

vrf

word

]

A.B.C.D

Configure the IP address of the DHCP

server globally.

Ruijie(config-if)#

IP helper-address

[

vrf

word

]

A.B.C.D

Configure the IP address of the DHCP

server on the interface. This command

must be set on the layer 3 interface.

Summary of Contents for RG-S2900G-E Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands

Ruijie RG-S2900G-E Series, Configuration Manual

Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands