Ruijie RG-S2900G-E Series Configuration Manual Download Page 869

Page: 869 / 943

Configuration Guide

NTP Configuration

Only when the global security authentication and key setting mechanisms are

completed, and the trusted key for communicating with server is set, can the

NTP client initiate the encrypted communication with the NTP server. To this

end, the NTP server should have the same trusted key configured.

Disabling the Interface to Receiving the NTP Message

The function of this command is to disable the interface to receive the NTP

message.

By default, the NTP messages received on any interface are available to the

NTP client for clock synchronization. This function can shield the NTP

messages received on the relevant interface.

Caution

This command takes effect only for the interface whose IP address

can be configured to receive and send packets.

To disable the interface to receive the NTP message, run the following

commands in the interface configuration model:

Command

Function

interface

interface-type number

Enter the interface configuration mode.

ntp disable

Disable the function of receiving NTP

messages on the interface.

To enable the function of receiving NTP messages on the interface, use the

command

ntp disable

in the interface configuration mode.

Enabling or Disabling NTP

The

no ntp

command is to disable the NTP synchronization service, stop the

time synchronization, and clear relevant information of NTP configuration.

The NTP function is disabled by default, but may be enabled as long as the NTP

server is configured.

To disable the NTP, run the following commands in the global configuration

mode:

Command

Function

no ntp

Disable the NTP function.

ntp authenticate

ntp server

ip-addr

[

version

version

][

source

if-name number

][

key

keyid

][

prefer

]

Enable the NTP function.

Summary of Contents for RG-S2900G-E Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands

Ruijie RG-S2900G-E Series, Configuration Manual

Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands