Ruijie RG-S2900G-E Series Configuration Manual Download Page 386

Page: 386 / 943

Configuration Guide

DNS Configuration

Ruijie(config)#

ip domain-lookup

Configuring the DNS Server

This section describes how to configure the DNS server. The dynamic domain

name resolution can be carried out only when the DNS Server is configured.

The

no ip name-server

[

ip-address

] command can be used to remove the DNS

server. Where, the

ip-address

parameter indicates the specified DNS server to

be removed. If this parameter is omitted, all the DNS servers will be removed.

Command

Function

Ruijie(config)

# ip

name-server

ip-address

Add the IP address of the DNS Server. The switch

will add a DNS Server when this command is

executed every time. If the domain name can‟t be

obtained from the first DNS Server, the switch will

send the DNS request to the subsequent several

servers until the correct response is received. The

system can support six DNS servers at most.

Configuring the Host Name to IP Address Mapping Statically

This section describes how to configure the host name to IP address mapping.

The switch maintains a host name to IP address corresponding table, which is

also referred to as the host name to IP address mapping table. You can obtain

the mapping table in two ways: manual configuration and dynamic learning.

Command

Function

Ruijie(config)#

ip host

host-name ip-address

Configure the host name to IP address

mapping manually.

This command with the parameter

can be used to remove the mapping

between the host name and IP address.

Clearing the Dynamic Buffer Table of Host Names

This section describes how to clear the dynamic buffer table of host names. If

the command

clear host

* is entered, the dynamic buffer table will

be cleared. Otherwise, only the entries of specified domain names will be

cleared.

Command

Function

Ruijie#

clear host

[

word

]

Clear the dynamic buffer table of host

names.

The host names configured statically

will not be removed.

Summary of Contents for RG-S2900G-E Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands

Ruijie RG-S2900G-E Series, Configuration Manual

Search results

Summary of Contents for RG-S2900G-E Series

Reviews:

Related manuals for RG-S2900G-E Series

Brands by name

Popular brands