Ruijie RG-S2900G-E Series, Configuration Manual

Page: 496 / 943

Configuration Guide Configuration

Use aaa new-mode to enable AAA. AAA must be enabled before using
; for the information how to enable aaa new-mode , please refer to
AAA Overview.

Use tacacs-server host to configure one or multiple servers.

Use tacacs-server key to specify server and NAS shared key.

Use tacacs-server timeout to specify timeout time waiting for the server reply;

If you need to authenticate, use aaa authentication to define using
identity authentication method list. For the detailed information, please refer to
authentication configuration.

If you need to authorize, use aaa authorization to define using
authorization method list. For the detailed information, please refer to
authorization configuration.

If you need to account, use aaa accounting to define using
accounting method list. For the detailed information, please refer to accounting
configuration.

You shall use the defined authentication list in the specified line, or you use the
list by default.
Configuring Protocol Parameter
You need to ensure that the network communication of server runs well
before configuring on the network device. Use the following commands to
configure protocol parameters:
Command Function
configure terminal Enter the global configuration mode.
aaa group server
group-name
Configure group server, dividing different
server into different groups.
server ip-address
Configure the server addresses in group
server.