Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 298 / 383

298 ROWE Series 4000 + 6000 Operating instructions
[435] Enabling remote maintenance
Establish a remote maintenance connection by clicking onto the
"Establish connection" button. The current connection status
displays on the "Status" line. The system is connected once the
text "Connected" appears.
Note: Check the proxy settings if there is no connection established,
please.
Note: Please contact the ROWE support for submitting a fault
description once the ROWE system has been connected.
Energy saving mode
:
You may set different energy saving modes via the operator panel on
the ROWE network printer. The operating mode to be set depends on
the queued print volume and the desired printer availability. When in
energy-saving phase, the fusing heating will be reduced or completely
switched off after an adjustable delay. Further modules are also set to
an energy-saving mode. A new print job will terminate the energy-
saving phase and enable the warming-up phase. After reaching the
operating temperature, the print job will be immediately executed.