Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 334 / 383

334 ROWE Series 4000 + 6000 Operating instructions
Jam cross folder : This message [Fig. 512] can only appear on
ROWE systems with connected online folder. The message means
that there is a jam in the cross-folding region of the folder. See
chapter "Jam elimination" in the folder operating instructions for
further information.
[512] Jam message "Jam cross folder"
Jam stacker : This message [Fig. 513] can only appear on ROWE
systems with connected online folder. The message means that
there is a jam in the stacker region of the folder. See chapter "Jam
elimination" in the folder operating instructions for further
information.
[513] Jam message "Jam stacker"
Fault cutter : This message [Fig. 514] means that there is a jam of
the cutter in drawer one. Open drawer one and check to see
whether there is residual paper in the cutter path (gap above the
cutter buttons). If this is the case, remove them. If not, contact the
ROWE authorized service, please.
[514] Fault message "Jam cutter"
Jam fusing heating : This message [Fig. 515] means that there is a
fault in the fusing region of the printer. Shut down the ROWE system
using the red Stop button (offline). Switch off the device via the
master switch. Wait 30 seconds. Then restart the ROWE system.
Jam cross-folder
Jam stacker
Fault cutter