Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 256 / 383

256 ROWE Series 4000 + 6000 Operating instructions
[354] Stamp editor description
4. Now select the desired parameters and confirm your entry
through clicking onto the "OK" button.
Changing a stamp
Changing a stamp, proceed as follows:
1. Click onto the "Change" button [Fig. 355].
Field Function
Alignment
Offset
g
Pages
Rotate
Scale with image
Rotate with image
Mirror labeling
Transparent
Watermark
Unit
In this field, you may set the stamp alignment on the
printout.
In this field, you may assign an offset value for the stamp
position.
In this field, you may define on which pages of a multi-
page file the stamp should be printed.
In this field, you may determine the rotational angle of the
stamp.
With this field enabled, the stamp will be scaled together
w ith the print file.
With this field enabled, the stamp will be mirrored.
With this field enabled, the stamp will be represented
transparent.
With this field enabled, the stamp will be printed as
w atermark on the print file.
With this field enabled, the stamp will be rotated together
w ith the print file.
In this field, you may set the measurement unit of the
entered parameters.