Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 122 / 383

122 ROWE Series 4000 + 6000 Operating instructions
Originals output
The ROWE RC/RCS network scanner offers four selectable options of
originals output
Output to the rear:
In this setting, the original is ejected from the rear scanner
output after scanning.
Hold at rear:
In this setting, the original is run out from the rear scanner
output after scanning but the end of the original will be held
by the scanner's last rear pair of rollers.
Eject to the front:
In this setting, the original will be transported back to the
feed table and ejected there.
Output to the front:
In this setting, the original will be transported back to the
feed table and held by the scanner's first pair of rollers.
Managing this setting, proceed as follows:
1. Press the "Function" button [button group G7]. The following menu
will open [Fig. 157]. Using the arrow buttons 'Up/Down' [Fig. 157],
select menu option "Output options" and confirm your selection via the
enter button. This will get you automatically to the next menu level.
You may abort the process and exit the menu by using the offline
button.
[157] Overview of the buttons to be pressed for setting the scanner output options
Stacker
> Output option
Mirror
Invert