Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 37 / 383

Using the ROWE RS / RCS 4000 + 6000 for printing 37
but possibly with reduced quality and resources, e.g. toner
warning, roll 1 empty.
Faults
The printer will go to offline mode waiting till the fault has been
remedied, e.g. cover open, toner empty, drawer open, knife jam
Consumption data
The current electronic counter readings for linear meters, square
meters and number of copies display
System data
Service data
The service data sector is password-protected
Roll data
The inserted rolls with medium and width display. In addition, the
remaining length of the material in the roll displays as percent.
Note: The indicated remaining length depends on the length of
the inserted roll and the set length of roll in the roll menu. See
chapter "Replacing the toner / Inserting paper" for further
information, please
Counters
The ROWE network printer Series RS /RCS 4000 + 6000 are
standard-equipped with two mechanical counters and three
electronic counters.
You find the mechanical cog counters on the left front side of the
ROWE network printer. You will need to open drawer one for
reading the counters. The counters count square meters and
linear meters.[Fig. 12]
[12] Front view of the ROWE RS / RCS network printer. Position of mechanical counters