Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 79 / 383

Chapter 3: Using the ROWE RS / RC / RCS 4000 + 6000 for copying 79
Creating a set copy, proceed as follows:
1. Place the original against the original ruler with the lettered page up
and justified to the right sliding the original into the originals entry
slot till the original is pulled in. [Fig. 83].
[83] Overview how the paper is inserted.
2. The scanner will run a 100 mm long prescan for width detection
purposes provided the 'Automatic width detection' had been
enabled. Then the original is returned to its start position. The
scanner will now display the identified width [Fig. 84]
[84] Display dialog Width detection.
3. Make sure that the correct printer has been selected. The selected
printer is displayed on the right upper part of the display. Now press
the button 'Set' [button group G7] and start scanning using the start
button. The original is scanned. Then insert the next originals and
scan them too. When you have scanned all originals, press the button
'Set' once more for closing the set and starting the output. [Fig. 85]:
ZOOM 100%|ROWE RCS
Copies 1 |Paper
400 DPI |
841 mm | AUTO