Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 70 / 383

70 ROWE Series 4000 + 6000 Operating instructions
Note: Negative margins means that the preset width on the
corresponding page is cut and positive margin means that the
preset width is added on the corresponding page.
Note: This function is only available in connection with a ROWE
network printer.
Selecting the input format
The ROWE network scanner are standard configured such that the
width of the original is automatically identified at millimeter-
precision. But you may additionally disable the automatic width
detection and set the input width manually. This is how to proceed::
1. Press the "Format" button [button group G6]. The following menu
will open [Fig. 15]. Using the arrow buttons 'Up/Down' [Fig. 15],
select the desired menu option and confirm your selection via the
enter button. This will get you automatically to the next entry level.
Exit the menu by using the offline button.
[71] Overview of the buttons to be pressed for selecting the input format
Format
Following modes on the scanner are at your disposal under
Format:
auto
means that the scanner will automatically identify the
width of the original at millimeter-precision.
> Format ->
Standard format ->