Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 299 / 383

Chapter 14: Administrative settings 299
You may determine the energy-saving parameters on the operator
panel of the ROWE network printer RS / RCS. Setting the energy-
saving mode, proceed as follows:
1. Keep the enter button [Fig. 436] depressed for three seconds, then
the menu will open
[436] Enter button on the operator panel
2. Using the arrow buttons 'Up/Down' [Fig. 437], select menu option
"Machine data" and confirm your selection via the enter button. This
will get you automatically to the next menu level. You may abort the
process and exit the menu by using the offline button:
[437] Overview of the buttons to be pressed for setting the energy-saving mode.
3. Using the arrow buttons 'Up/Down' [Fig. 438], select menu option
"Energy saving mode and confirm your selection via the enter
button. You may abort the process and exit the menu by using the
offline button:
[438] Overview of the buttons to be pressed for setting the energy-saving mode.
4. Using the arrow buttons 'Up/'Down' [Fig. 439], you may now select
and edit the various "Energy saving mode" parameters. Confirm you
selection using the enter button. You may abort the process and exit
the menu by using the offline button:
> Machine data
Initialization
Language
Test plot
Parameters
Status
Consumption data
> Energy saving mode