Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 95 / 383

Chapter 4: Using the ROWE RCS / RC 4000/ 6000 for scanning 95
2. The printer will switch to offline mode. The rolls will be rewound. The
print will not accept any further pint jobs. The display shows "System
being shut down".
3. After one minute, the display will show "You may switch off the
system now! Restart > Green button".
4. Actuate the green "Start" button for immediate restart [Fig. 117].
[117] 'Start' button on the operator panel
5. Set the ON/OFF switch [Fig. 111] on the rear of the device to
position "0" for switching off the printer.
Note: Switching off the device without prior shut down may cause
loss of data as well as errors in the operating system. Let five
seconds pass after switching off before restart.
Scanner operator panel
The ROWE RC / RCS 4000 + 6000 models are very user-friendly
systems. The scanner particularly excels in easy operability. Normal
scan jobs are simply executed by pressing the green start button on
the operator panel. You will need to replace the standard scan
settings with the individual preferences only in the event that you
want to execute more complex scan jobs using the scanner operator
panel.
The operator panel is located above the original feed. The operator
panel consists of various buttons for operating the scanner (in the
case of RCS models for scanner and printer) and a four-line LCD
display.