Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 68 / 383

68 ROWE Series 4000 + 6000 Operating instructions
Selecting the output medium
You can select the medium via the scanner operating panel to which
the copy on the ROWE network printer should be directed to. This is
how to proceed::
1. Press the "Medium" button [button group G6, p. 59]. The following
menu will open [Fig. 68]. Using the arrow buttons 'Up/Down' [Fig. 68],
select the desired "Medium" and confirm your selection via the enter
button. The current selection will be stored and the menu
automatically closed.
[68] Overview of the buttons to be pressed for selecting a printer medium
Information: You may select all media from the scanner
operating panel that are configured on the printer. For this
purpose, also compare chapter 2 'Setting the material type' from
page 36
Note: This function is only available in connection with a ROWE
network printer.
Selecting a folding program
Provided an optional ROWE online folding system is connected to your
ROWE network printer, you may select a folding program via the
scanner operating panel so that the copies are directly folded when
output from the ROWE network printer online. This is how to proceed::
1. Press the "Fold" button [button group G6]. The following menu will
open [Fig. 69]. Using the arrow buttons 'Up/Down' [Fig. 69], select the
desired "Medium" and confirm your selection via the enter button. The
current selection will be stored and the menu automatically closed.
>Paper
Transparent
Polyester
Film