Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 212 / 383

212 Series 4000 + 6000 Operating instructions
ROWE Print Master
Introduction
The ROWE Job Management consists of two applications that are
arranged on the web-based ROWE Print Manager. The first
application is the ROWE PRINT MASTER LT. This application offers
you the option of sending print jobs to the ROWE network printer.
You may load files into the ROWE PRINT MASTER LT, set print
options for the job and send them to the ROWE printer. The second
application is the ROWE PRINT MASTER. This application features
all functions of the ROWE PRINT MASTER LT and, in addition, you
may determine print options for each file and view a print preview of
each file.
Starting the ROWE PRINT MASTER
Starting the ROWE PRINT MANAGER, proceed as follows:
1. Start the browser on a workstation that is connected to the
ROWE system via the network. On the address line, enter the IP
address or the host name of the ROWE device. The following
page will open:
[285]ROWE Print Manager /ROWE Scan Manager on ROWE RCS
2. Start the application through clicking onto the name "PRINT
MANAGER" [Fig. 286]:
[286] Starting the application "ROWE PRINT MANAGER"