Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 230 / 383

230 Series 4000 + 6000 Operating instructions
[310] Description of the ROWE PRINT MASTER "Preset" page
Note: You define on the "Preset" page the default settings for all
files of a job. Clicking explicitly onto a file in the file list will open
a page with the name of the file in which you may carry out
individual settings that may deviate from the settings on the
"Preset" page.
Field Function
Pen mapping
Copies
Stamp
In this field you may select and enable a stamps file
defined on the ROWE network printer such that it will be
printed onto the drawing.
Note: Stamps can be created via the optional stamp
editor in the "ROWE PRINT SPECIALS" application.
In this field, you may select pen mappings for print files
(HPGL or Calcomp). A pen mapping table allots fixed pen
parameters to the file, e.g. width and color. The print file in
HPGL/2 already contains pen definitions. Select previously
defined pen mapping only in the event that you want to
change these parameters.
Note
: The printer always needs information
about pen width and color. A default table will be drawn
on in case that this information should neither be
available in the file nor in form of a table. In this table, all
pens are defined to be in black color and have a width of
0.35 mm.
Note: Pen mapping can be created via the optional pen
editor in the "ROWE PRINT SPECIALS" application.
In this field, you may determine the number of
copies per file. The number of copies for a file is
multiplied by the number of job copies on the "Job" page.