Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 232 / 383

232 Series 4000 + 6000 Operating instructions
Note: You may create and adapt the label file via the optional label
editor of the "ROWE PRINT SPECIALS" application .
Note: You may represent any labeling inside or outside the drawing;
i.e. if you position the labeling outside the drawing then the output
document will be issued correspondingly larger by the labeling - as
opposed to any stamp. A stamp can only be represented inside a
drawing. A stamp placed outside would not be visible on the output
document.
Executing a print job
Executing a print job on ROWE PRINT MASTER, proceed as
follows:
1. Upload the file to be printed to the ROWER PRINT MASTER
by clicking onto the "Add file" button [Fig. 298]. On the
selection window shown, highlight the desired file by clicking
onto it and confirm you selection using the "Open" button.
[313] Select menu of ROWE PRINT MASTER
Once you have added all files to the list and set the desired printer
parameters, start the print job by clicking onto the "Print" button