Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 46 / 383

46 ROWE Series 4000 + 6000 Operating instructions
Lack of resources
Lack of resources can be caused, for instance, through an empty
paper roll or a non-existing medium in the printer. Now if a print job is
sent to the printer that required this roll or a non-existing medium then
the printer display will show a dialog field [Figure 33] indicating the
kind of deficiency. Now you can remedy this deficiency by inserting
the resource (see chapter 'Replacing the toner / Inserting paper' for
further information). Alternatively, the dialog field in the display offers
you four selection options to eliminate the lack of resources. You may
select between these four options using the arrow buttons 'To left/To
right' [Fig. 33] and confirm your selection via the enter button. You
have the choice of the following options:
1. „ on hold? “ This option means that the print job on
the job list is put on status "stopped" to be restarted
from the job list manually at a later time.
2. „ delete file" “ This means that a print job can consist
of different files. This option will however delete that
file for which the lack of resources had occurred.
3. „ delete job? “ This option will delete the entire print
job including all files associated with it.
4. „ simple output? “ When you have selected this
option, the device tries to output the file to be
exported to another existing medium or a larger roll.
Information: If you did not respond to the lack of resources dialog
within one minute the printer will automatically assume the status "on
hold"! This period can be individually adapted through a ROWE
authorized service technician.