Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 337 / 383

Chapter 16: Troubleshooting 337
Cover open : The message [Fig. 520] means that a cover, flap or
door is not properly locked. Close all covers to render the device
operative again.
[520] Message "Cover open"
Drawer open : The message [Fig. 521] means that a drawer is not
properly closed. Close all drawers to render the device operative
again.
[521] Message "Drawer open"
Temp. too low
: The message [Fig. 522] means that the
temperature in the printer fusing area is too low for the medium to
be output. This message can occur after a print process on film and
a following job on paper. If this message does not disappear within a
couple of minutes, shut down the ROWE system via the red Stop
(offline) button. Switch off the device via the master switch. Wait 30
seconds. Then restart the ROWE system. If he message reappears,
contact the ROWE authorized service, please.
[522] Message "Temp. too low"
Note: Switching off the device without prior shut down may cause
loss of data as well as errors in the operating system. Let approx. 30
seconds pass after switching off before restart.
Cover open
Drawer open
Temp. too low