Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 315 / 383

Chapter 15: Replacing the toner / Inserting paper 315
- ISO A2 420 mm
- ISO A1 594 mm
- ISO A0 841 mm
- ISO B3,364 mm
- ISO B2,515 mm
- ISO B1 728 mm
- ARCH B 12" 305 mm
- ANSI C 17" 432 mm
- ARCH B 18" 457 mm
- ANSI C 22" 559 mm
- ARCH B 24" 610 mm
- ANSI C 30" 762 mm
- ANSI C 34" 864 mm
- ANSI 36" 914 mm
Specifying a user-defined roll width
1. Proceed as in section "Determining the roll width" till point 5. At this
point and using the arrow buttons 'Up/Down', select menu option
"User
xxx mm"
[470] Overview of display dialog and buttons to be pressed
2. Start the edit function by depressing the roll button for three
seconds. The numerical value will flash. Using the arrow buttons
'Up/Down' [Fig. 470] then, select the desired roll width and confirm
your input via the enter button. This will automatically save the roll
width selected and exits you from the menu.
[471] Overview of display dialog and buttons to be pressed
ANSI E 34" 864 mm
ANSI 36" 914 mm
> User 444 mm
ISO A3 420 mm
ANSI E 34" 864 mm
ANSI 36" 914 mm
> User 444 mm
ISO A3 420 mm