Rowe RC 4000 + 6000, Operating Instructions Manual

Page: 77 / 383

Chapter 3: Using the ROWE RS / RC / RCS 4000 + 6000 for copying 77
1. Press the "Function" button [button group G7]. The following menu will
open [Fig. 80]. Using the arrow buttons 'Up/Down' [Fig. 80], select
menu option "Stacker" and confirm your selection via the enter button.
This will get you automatically to the next menu level. You may abort
the process and exit the menu by using the offline button:
[80] Overview of the buttons to be pressed for setting the stacker.
2. Using the arrow buttons 'Up/Down' [Fig. 181], select the desired
output and confirm your selection via the enter button. The current
selection will be stored and the menu automatically closed.
[81] Overview of the buttons to be pressed for setting the stacker.
Note: This function is only available in connection with a ROWE
network printer.
Set processing
A set of originals is a number of correlated originals, e.g. a folder with
drawings. Now you want to create two copies from this folder. So you
want to scan the drawings of the folder as correlated set selecting two
sets of copies from this set. With the last drawing scanned, the printer
will now issue two sets in that order in which they were filed in the
folder. See [Fig. 82]
> Stacker
Output option
Mirror
Invert
Front
> Normal
Belt 1
Belt 2