Working from the inside, install B-4 connector on every other side profile
on both sides of greenhouse. Secure each with one bolt.
Hook one end of bungee cord into top
hole in B-4 connector on each side.
NOTE: Use the included five foot bungee cords for added support. They will help
hold the sides in position while assembling the roof. Remove as you install profiles.
8.2A
8.2B
8.2
B-4
S-2C
8
8
Connector
QTY
4
QTY
5’ Bungee Cord
B-4
F-1
WARNING: Use two people to install roof. Allow enough time to complete this step and
install and secure roof. Do not leave roof unattended until it is completely assembled.
IMPORTANT: The panels expand and contract depending on the temperature. Under some conditions, the
panels may require slight force to install. Do not use excessive force or you may move profiles out of position.
When you are having dificulty sliding the panels, use dish soap with water on the edges as a lubricant.
The roof panels are installed in the sections shown
below. Use two people and a step ladder to
assemble the roof. Place step ladder inside
greenhouse. Have one person stand on
ladder inside and guide panel into
channels in roof ridge and corner
profiles. The other person
supports the end of the
panel from the outside.
Section 1: Back two W-1 panels
Section 2: Front two W-1 panels
Section 3: Next three W-1 panel from back
Section 4: Next three W-1 panels
Section 5: Next five W-1 panels
Section 6: Final W-1 panel and four W-2 panels
33 of 46
WWW.RSIWW.COM
NOTE: VIEW FROM OUTSIDE.
NOTE: VIEWS FROM INSIDE.
NOTE: VIEWS FROM INSIDE.
5
5
5
5
5
6
6
6
6
6
2
2
1
1
3
3
3
4
4
4
bungee cord
bungee cord
bungee cord
bungee cord