Continue along back wall. Place first F-10 profile
on next W-1 panel. Make sure profile fits snugly
between the two F-1 wall profiles.
Place second F-10 profile on
next W-1 and ensure
it fits snugly.
Place second F-6 profile with mitered end next
to corner and angled edge facing up onto
corner W-1 panel. F-6 profile fits snugly
between F-7 corner profile and
F-1 wall profiles.
3.4
3.4A
3.4B
3.4C
3.4D
3.5A
3.5B
From inside, loosen set screws on profiles and adjust position to fit holes in B-1 connectors.
Fit B-1 connector to profiles as shown.
S-2C
9
Connector
QTY
B-1
3
Working from inside right corner, place
F-6 profile with mitered end next
to corner and angled edge
facing up onto corner W-1
panel. F-6 profile fits snugly
between F-7 corner profile
and F-1 wall profiles.
Secure each B-1 connector
with three bolts.
NOTE: ALL VIEWS FROM INSIDE.
NOTE: ALL VIEWS FROM INSIDE.
B-1
B-1
B-1
F-10
F-6
F-6
F-1
F-1
F-1
F-10
F-7
F-6
G-1
F-1
W-1
F-6
F-7
F-1
F-10
W-1
F-1
W-1
F-6
F-7
F-10
F-1
F-1
W-1
W-1
F-10
F-10
F-1
F-1
W-1
WWW.RSIWW.COM
16 of 46
The two sets of F-6 and F-10 profiles fit on top of W-1 panels. Line up
bottom bolt channels with top edge of F-1 and F-7 vertical profiles.
Profiles will fit snugly.
