B-7
S-2C
4
2
Connector
QTY
5.6A
5.6B
5.6C
5.8
5.7
Working from inside, remove plastic film from both sides
of two W-3 panels. Fit each panel into
channels in profiles, placing side
marked “ UV Resistant”
facing outside.
Continue working from intside, install door frame. Loosen
set screws on ends of F-5 profile
and adjust position
to fit holes in B-2
connector.
Remove plastic film from both sides of two W-5 panels. Fit each panel into
channels in profiles, placing side
marked “ UV Resistant”
facing outside.
NOTE: VIEWS FROM INSIDE.
NOTE: VIEWS FROM INSIDE.
W-5
2
Panel
QTY
24” x 21 ¾”
B-2
B-2
F-5
Secure with two bolts.
Ensure height to base
is 65¼”.
S-2C
2
Connector
QTY
W-3
2
Panel
QTY
24” x 15
½”
W-3
W-3
W-5
W-5
WARNING: The corners of W-5 panels are
sharp. Use extreme caution when handling.
B-2
F-5
WWW.RSIWW.COM
25 of 46
WARNING: The corners of W-3 panels are
sharp. Use extreme caution when handling.
From inside, add connector B-7 to each corner. Secure each with two bolts.
G-1
F-6
G-1
F-6
G-1
F-7
F-6
B-7
IMPORTANT: Bolt track of F-6 front profile is
lower than bolt track of G-1 gutter profile.
NOTE: VIEWS FROM INSIDE.
