5.4A
5.4B
5.4C
5.4D
5.4E
5.4F
Fit B-3 connector and secure with
two S-2C bolts.
Continue working from inside right corner, place F-6 profile with
mitered end next to corner and angled edge facing up onto
corner W-1 panel. F-6 profile fits snugly between
F-7 corner profile and F-1 wall profiles.
From inside, line up F-3 profile as
shown. Make sure B-2 connector is
pointing towards door opening.
IMPORTANT: The panels expand and contract depending on the temperature.
To ensure proper placement, use the 23 inch spacer included with the tools.
Working from inside front right corner, install F-1 profile next to W-1 panel.
Place 23 inch spacer on base next to F-7 corner profile and slide F-1 profile
against spacer to ensure proper placement.
F-1
W-1
F-7
F-6
G-1
F-1
F-7
F-6
F-3
F-1
B-2
NOTE: VIEW FROM INSIDE.
NOTE: VIEW FROM INSIDE.
NOTE: VIEW FROM INSIDE.
NOTE: VIEW FROM INSIDE.
Adjust set screws and place B-2 connector on
profiles as shown. Slide set screws in vertical
openings to center of opening so B-6 trim
plate will fit properly.
Install B-6 trim plate and secure with
three bolts.
W-1
W-1
F-7
F-1
spacer tool
B-3
B-2
B-6
B-6
1
Trim Plate
QTY
Connector
QTY
B-2
1
S-2C
3
NOTE: Panels will not fit completely to end of channels.
There will be some space to allow for temperature changes.
WWW.RSIWW.COM
23 of 46
