A-2
A-1
Secure to Platform
The base has predrilled holes in the inside and outside bolt channels so
you can easily secure your greenhouse to a wood platform. Screw
S-4 screw into hole in base through wood until screw is flush
with base profile. Continue process around outside and
inside of greenhouse until it is evenly secured.
Use ten A-1 ground anchors with ten A-2 anchor brackets on the inside of the greenhouse to
secure it to the ground. Place on each
side at the front, center and back.
11.1
NOTE: The S-4 screw is designed to be used with wood. When securing base to
foundations made of materials other than wood, use an appropriate fastener.
11.2
11.2A
11.2B
A-2
10
Bracket
QTY
A-1
10
Ground Anchor
QTY
S-2C 20
S-4
89
Connector
QTY
S-4
Attach each anchor bracket with two
set screws in the inside bolt channels in
base profile. Secure each with two bolts.
WWW.RSIWW.COM
46 of 46
Screw each A-1 ground anchor through
hole in center of bracket. Use a screw driver
through the top of
A-1 anchor to screw
completely into soil.
Make certain it is
secured in ground.
NOTE: Have the hex shaped indent facing up. Screw in until it is flush with bottom of nut so
it slides easily into bolt tracks. After inserting into bolt track, screw in until it holds in place.
Make certain the pieces are in the correct positions before assembling.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
Prepare needed set screws as shown in step 1.1A
